Only the scripts v 0.7.1
https://drive.google.com/…/fo…/0B8uZtHByEHyBMkNRRmk4T2E1ZUk…
This image was made Michael Vencio. It was based on his findings on the FB Group pi2jamma
Install Instructions :
1. Download and write using Win32DiskImager retropie 4.3 to sd card
2. Place SD card in the raspberry pi and power on
3. Expand Filesystem
Retropie > raspi-config > 7 > A1
4. Configure WIFI or Wired Internet
5. Transfer Roms and Bios
6. Press Start > Quit > Restart Emulation Station
7. Center the screen for each system
(Note : use a horizontal game for arcade and fba)
Open a game, bring up the retroarch menu
Go to “Settings > Video”, set the following Video Settings for each system in order to center and fit the screen.
Custom Aspect Ratio X Pos.
Custom Aspect Ratio Y Pos.
8. Save Configuration once per each system.
Configuration > Save Current Configuration
9. Repeat step 7 and 8 until all systems are configured.
10. Enjoy and post your results.
*** For consoles/handhelds not in the list, please follow these instructions.
1. Open a game, bring up the retroarch menu
2. Go to “Settings > Video”, set the following Video Settings in order to center and fit the screen.
Aspect Ratio = Custom
Custom Aspect Ratio X Pos. = user entered
Custom Aspect Ratio Y Pos. = user entered
Integer Scale = ON
Custom Aspect Radio Width = user entered
Custom Aspect Radio Height = (1x)
3. If the picture still does not fill the screen horizontally, set “Integer Scale = OFF”. Adjust “Custom Aspect Radio Width” and below to center if needed.
Custom Aspect Ratio X Pos. = user entered
Custom Aspect Ratio Y Pos. = user entered